-
PTFE & Nylon Bushings and Washers
ptfe---nylon-bushings-and-washers
-
PTFE Composite J-4200 (Rulon LR) Bushing and Washers
This material is Ideal for rotary and linear bearings, BJ4 eliminates the need for lubrication in almost any environment. (JLON 4200)
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
-
PTFE Composite J-5500 (Rulon J) Bushings and Washers
This material is Ideal for running against soft mating surfaces such as mild steel, aluminum, and SAE 316 stainless steel. J-5500 will not wear mating surfaces unlike other typically found filled PTFE compounds.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
-
PTFE Composite J-7000 (Rulon 641) Bushings
This material is made from a specially formulated PTFE compound, designed for high load and wear resistance in food and drug contact applications. All the components of J-7000 are FDA compliant and non-toxic.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
-
PTFE Synthetic Fiber Lined Composite Bushings
BNW is a self-lubricating material, it has high load carrying capabilities and is a sliding bushing which works well in a non-lubricated condition. The bushing layer consists of a PTFE/high-tension synthetic fiber liner. The backing layer consists of fiberglass impregnated into epoxy resin for high temperature. These bushings are designed for slow speed/under heavy load applications. These Bushings cannot be machined.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
-
MoS2 Impregnated Nylatron Bushings
Nylatron is a nylon material with added molybdenum disulfide lubricant powder. Nylatron bearings give advantages over standard nylon such as superior wear resistance at an acceptable price. Nylatron is a self-lubricating nylon.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
-
Nylon 101
Bushings & Bars Direct Nylon Bearings
NYLON -Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required. Bushings & Bars Direct carries a full line of sleeve (plain), flange, and thrust styles to accommodate shafts up to 1" diameter.
Bushings & Bars Direct Nylon Bearings inner diameters are measured after installation in a nominal housing.
Temperature range: -20°F/+250°FWARNING: This product can expose you to chemicals including Nickel, Lead & Tetrafluoroethylene which is known to the state of California to cause cancer. Lead and Nickel which are known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
-
Peek 1000 Bushings
Peek bushings offer good heat, wear and chemical resistance when compared to other dry-running bushings. They are lightweight and strong.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.